• Hollow Shaft Direct Drive Torque Motors for Machine Tools

    These TMX series motors can produce a very high S1 torque density and are available with a choice of stator and rotor lengths to best suit the motion requirements of the application. By way of example a 140 mm diameter motor with an active length of 70 mm can produce a peak torque of approximately 82 Nm at speeds up to 1 500 rpm and a

  • Eco-friendly Waste Electric Motor Stator Recycling Machine

    It is specially designed for recycling the motor stator to get the copper. Kinds of motor from washing machine pump fans and machines. Motor stator consists of three parts the stand and installed within the frame of the cylindrical core and the copper wire winding.Waste motor stator cutting and dismantling machine is forcible entry of special equipment for motor stator the equipment adopts

  • Wastewater Grinder instead of bar screen Solid waste

    Huanchuang (Xiamen) Technology Co. Ltd. is specializing in Wastewater Grinders instead of band screen Solid waste shredders crushers widely used in wastewater treatment plants municipal supply and drainage power stations solid waste reduction waste to energy.

  • Waste and Recycling Companies and Suppliers in Croatia

    Tana is an environmental technology company and the forerunner in providing solutions for the field of solid waste management. Our main objective is to develop intelligent machines and services to meet and exceed our customers expectations.

  • Capitalizing on China s recycling policy Recycling

    The company says that thanks to the extended lifetimes of the stator and rotor blades adjustment of the cutting gap on a machine running at a typical recycling operation no longer needs to be carried out. The blades can be changed very quickly using proven clamping technology so

  • Productive froth flotation technology FL

    The rotor-stator/disperser combinations in our redesigned forced-air (nextSTEP™) and self-aspirated (WEMCO) flotation machines provide longer lifespan. In addition using patented bypass equipment our flotation mechanisms can be serviced or removed for maintenance without process interruption.

  • Laser Waterjet Plasma Cutting Systems Page 2 of 5

    An Eagle fiber laser cutting head with laser beam from MSS Lasers is one of the most advanced systems in the market with linear drives on all three axes and a low inertia carbon fiber transverse bridge construction that can accelerate up to 6G with achieve cutting speeds in excess of 100 m/min.

  • Redesign of steam turbine rotor blades and rotor packages

     · The selection of a specific technologymilling the rotor blades and packages on a CNC machine is also related to a decrease in electricity consumption. In the case of the rotor blades a decrease was observed at the level of 29.4 whereas for the rotor packagesthe reduction in energy consumption was at the level of 25.0 .

  • Adaptive Stator Flux and Torque Decoupling Control of

    Adaptive Stator Flux and Torque Decoupling Control of Induction Motors Fault Identification Method of Rotor Inter Turn Short-Circuit Using Stator Winding Detection. Yonggang L. / Heming L. / Hua Z. 2004. Research on Current Mode Tri-State Modulation Technology in Switching Power Amplifier For Magnetic Bearings. Zang X.-m. / Wang

  • High-shear mixers dispersers

    The High Shear In-Line Mixers from Silverson are elf-pumping aeration-free mixers that have the capacity to reach up to 3600 rpm. Designed to handle interchangeable workheads this maintenance-friendly machine efficiently dissolves solids and reduces particle size cutting the mixing time up to 90 .

  • (PDF) A task for laser cutting of lamellae with TruLaser 1030

    The report presents some results from a study to the process of laser cutting through melting on lamellae for rotor and stator packages by using the laser system TruLaser 1030.

  • Waste and Recycling Companies and Suppliers in Croatia

    Tana is an environmental technology company and the forerunner in providing solutions for the field of solid waste management. Our main objective is to develop intelligent machines and services to meet and exceed our customers expectations.

  • StatorsRoto Pumps

     · Material Options for Stator. Natural. Nitrile. High Nitrile. EPDM. Chloro-Sulphonated Rubber. Food Grade White Nitrile. HNBR. Fluoro Elastomer. Food Grade White Fluoro Elastomer AFLAS. Tubing can be in Mild Steel SS 04 SS 316.

  • Van Aarsen Rubber Technology Tyre recycling plant shredder

    Completes Construction of New Hungarian Tyre Recycling Plant > Demand in Eastern Europe Remains High as New Factories Open >EBRD and EU finance solid waste management in western Ukraine > Woom invests in sustainability and starts production in Poland > German investor pours EUR 11 mln in joinery plant in RO > EBRD and EU boost tourism

  • Rotoplex Ro Hosokawa Alpine

    It is characterised by an extremely powerful and robust design incorporating the Alpine cross-scissor cut rotor. High-grade spheroidal graphite cast iron in GGG-40 quality ensures that even in continuous heavy-duty operation the Rotoplex granulators do their job reliably over many years.

  • Generator Parts AccessoriesHonda Generator

    I am offering a cooling fan from a Honda ES6500K2 generator. Please note. This is the stator/rotor cooling fan(not the cooling fan on the engine flywheel) This item is in good working condition. The Honda part# for this fan is 31112-ZA0-D01.

  • Redesign of steam turbine rotor blades and rotor packages

     · The selection of a specific technologymilling the rotor blades and packages on a CNC machine is also related to a decrease in electricity consumption. In the case of the rotor blades a decrease was observed at the level of 29.4 whereas for the rotor packagesthe reduction in energy consumption was at the level of 25.0 .

  • Waste motor dismantling machine multi-function rotor

     · Waste motor dismantling machine multi-function rotor dismantling equipment saves labor. The equipment is novel in design and high in science and technology. The hydraulic copper chopping machine combines hydraulic and pneumatic in one which can realize the automatic copper removal treatment of the waste motor stator and the production

  • Waste and Recycling Companies and Suppliers in Croatia

    Tana is an environmental technology company and the forerunner in providing solutions for the field of solid waste management. Our main objective is to develop intelligent machines and services to meet and exceed our customers expectations.

  • Capitalizing on China s recycling policy Recycling

    The company says that thanks to the extended lifetimes of the stator and rotor blades adjustment of the cutting gap on a machine running at a typical recycling operation no longer needs to be carried out. The blades can be changed very quickly using proven clamping technology so

  • Waste and Recycling Companies and Suppliers in Croatia

    Tana is an environmental technology company and the forerunner in providing solutions for the field of solid waste management. Our main objective is to develop intelligent machines and services to meet and exceed our customers expectations.

  • An Online Stator Winding Resistance Estimation Technique

    An Online Stator Winding Resistance Estimation Technique for Temperature Monitoring of Line-Connected Induction Machines Wind Speed and Rotor Position Sensorless Control for Direct-Drive PMG Wind Turbines. Wei Qiao / Xu Yang / Xiang Gong The IAS--Cutting

  • copper shredder for cable diameter 25mm from experienced

    cable recycling gcb1200 waste circuit board for cable Copper Wire Shredder. cable diameter 25mm made in China in nigeria Environmental Friendly frp crushing recovery line for wire dcbl770b solid waste crusher for sale lowes scapcar goiania copper wire recycling for communication cable professional design hazardous waste shredde for electronic scrap high power professional waste plastic

  • professional design waste stator rotor fringing from

    waste stator rotor fringing for metal separation from High Quality 3 Phase Induction Electric Motor Rotor Stator Henan Yongrong Power Technology Co. Ltd. Chinese Supplier Low Price High Quality Hydro Generator Stator Winding for 100kw to 10mw is a professional manufacturer specializing in the R D and production of stator rotor..

  • Used Crushing units for saleMachineseeker

    Drive line 315 kW Rotor length 2000 mm inlet opening 2020 mm x 615 mm cutting diameter 785 mm Rotor speed 200 rpm Number of knives 50 rotor knives and 10 stator knives Hydraulic power unit 15 kW Post-pressing unit hydraulic swivelling screen basket Connection voltage 400V 50Hz dimensions LxWxH 2990 x 3200 x 3360 mm weight approx

  • Laser Waterjet Plasma Cutting Systems Page 2 of 5

    An Eagle fiber laser cutting head with laser beam from MSS Lasers is one of the most advanced systems in the market with linear drives on all three axes and a low inertia carbon fiber transverse bridge construction that can accelerate up to 6G with achieve cutting speeds in excess of 100 m/min.

  • waste stator recycling machine waste stator recycling

    Waste motor stator cutting and dismantling machine is forcible entry of special equipment for motor stator the equipment adopts the hydraulic system work the equipment can cut stator frame (limited to cast iron frame) cylindrical iron core in half exhaustion copper wire winding From cylindrical core complete the stator and rotor of the motor

  • Productive froth flotation technology FL

    The rotor-stator/disperser combinations in our redesigned forced-air (nextSTEP™) and self-aspirated (WEMCO) flotation machines provide longer lifespan. In addition using patented bypass equipment our flotation mechanisms can be serviced or removed for maintenance without process interruption.

  • Laser Waterjet Plasma Cutting Systems Page 2 of 5

    An Eagle fiber laser cutting head with laser beam from MSS Lasers is one of the most advanced systems in the market with linear drives on all three axes and a low inertia carbon fiber transverse bridge construction that can accelerate up to 6G with achieve cutting speeds in excess of 100 m/min.

  • Distributor machining of parts Europages

    Cuttingmachine tools (348) Machine tools cuttingparts and accessories (13) Surface treatmentmachinery and equipment (2) Welding soldering and brazingequipment and supplies (3) Diamond tools (3) Lubrication equipment and machinery (1) Steels and metalsmachining (82)

  • germany technology waste stator rotors from plastic/copper

    waste stator rotors for Recycling Industry from waste rotors scrap rotors scrap Suppliers and Manufacturers at electric motor rotor wrecker recycling machine MR-T motor stator winding and peeling Machine MR-T is our newly developed product this machine have 2 main parts one is cutting parts another is separating parts it can cut the scrap motor into 2pcs after cut the stator in

  • Adaptive Stator Flux and Torque Decoupling Control of

    Adaptive Stator Flux and Torque Decoupling Control of Induction Motors Fault Identification Method of Rotor Inter Turn Short-Circuit Using Stator Winding Detection. Yonggang L. / Heming L. / Hua Z. 2004. Research on Current Mode Tri-State Modulation Technology in Switching Power Amplifier For Magnetic Bearings. Zang X.-m. / Wang

  • Used Crushing units for saleMachineseeker

    Drive line 315 kW Rotor length 2000 mm inlet opening 2020 mm x 615 mm cutting diameter 785 mm Rotor speed 200 rpm Number of knives 50 rotor knives and 10 stator knives Hydraulic power unit 15 kW Post-pressing unit hydraulic swivelling screen basket Connection voltage 400V 50Hz dimensions LxWxH 2990 x 3200 x 3360 mm weight approx

  • Characterisation of Flow Pattern in a Rotor Stator High

     · Characterisation of Flow in a Rotor Stator High Shear Mixer 5 2.2. Mass and energy balances from LDA data The mass and energy balances around the mixing head are set in a control volume shown in Figure 4. Boundary 1 is a horizontal circle located 4 mm below the stator

  • Productive froth flotation technology FL

    The rotor-stator/disperser combinations in our redesigned forced-air (nextSTEP™) and self-aspirated (WEMCO) flotation machines provide longer lifespan. In addition using patented bypass equipment our flotation mechanisms can be serviced or removed for maintenance without process interruption.